Technique

• Pourvoir assigné de coupure de service en court-circuit (Ics):

  (230 V AC) 30 kA
  (250 V DC) 3 Poles in Series 10 kA
  (400 V AC) 30 kA
  (440 V AC) 30 kA
  (500 V AC) 10 kA
  (690 V AC) 3 kA
  

• Pouvoir assigné de coupure ultime en court-circuit (Icu):

  (230 V AC) 50 kA
  (400 V AC) 50 kA
  (440 V AC) 30 kA
  (500 V AC) 10 kA
  (690 V AC) 3 kA
  

• Courant assigné instantané de réglage de court-circuit (Ii):

  480 A
  

• Setting Range:

  25 ... 32 A
  

• Puissance assignée d’emploi AC-3 (Pe):

  (400 V) Three Phase 15 kW
  

• Puissance assignée d’emploi AC-3e (Pe):

  (400 V) Three Phase 15 kW
  

• Tension:

  Circuit principal 690 V AC
  Circuit principal 250 V DC
  

• Courant nominal de fonctionnement (Ie):

  32 A
  

• Courant assignée d’emploi AC-3 (Ie):

  32 A
  

• Courant assignée d’emploi AC-3e (Ie):

  32 A
  

• Courant assignée d’emploi DC-5 (Ie):

  32 A
  

• Fréquence assignée (f):

  Circuit principal 50 Hz
  Circuit principal 60 Hz
  

• Tension assignée de tenue aux chocs (Uimp):

  Circuit principal 6 kV
  

• Tension assignée d’isolement (Ui):

  690 V
  

• Power Loss:

  at Rated Operating Conditions per Pole 1.9 ... 3.1 W
  

• Nombre de pôles:

  3
  

• Courant thermique conventionnel à l’air libre (Ith):

  Main Circuit 32 A
  

• Indice de protection:

  Housing IP20
  Main Circuit Terminals IP10
  

• Degré de pollution:

  3
  

• Electrical Durability:

  50000 cycle
  

• Durabilite mecanique:

  100000 cycle
  

• Type de borne:

  Screw Terminals
  

• Connecting Capacity Main Circuit:

  Flexible with Ferrule 1/2x 0.75 ... 6 mm²
  Flexible with Insulated Ferrule 1/2x 0.75 ... 6 mm²
  Flexible 1/2x 1 ... 2.5 mm²
  Flexible 1/2x 2.5 ... 6 mm²
  Rigid 1/2x 1 ... 2.5 mm²
  Rigid 1/2x 2.5 ... 6 mm²
  

• Couple de serrage:

  Main Circuit 2 N·m
  

• Wire Stripping Length:

  Main Circuit 10 mm
  

• Recommended Screw Driver:

  Pozidriv 2
  

• Type d'encastrement:

  1 ... 6
  

• Montage sur rail DIN:

  TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
  TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
  

• Minimum Mounting Distance:

  Electrical Conductive Board, Horizontal - Up to 400 V 0 mm
  Electrical Conductive Board, Horizontal - Up to 690 V 1.5 mm
  Electrical Conductive Board, Vertical 75 mm
  Other Device Same Type, Horizontal 0 mm
  Other Device Same Type, Vertical 150 mm
  

• Actuator Type:

  Rotary Handle
  

• Contact Position Indication:

  ON / OFF / TRIP
  

• Normes et standards:

  IEC/EN 60947-1
  IEC/EN 60947-2
  IEC/EN 60947-4-1
  UL 60947-1
  UL 60947-4-1
  

• Remarques:

  UL508 Self-Protected Combination Motor Controller (Type E) in combination with feeder block S1-M3-xx