Technique

• Number of Auxiliary Contacts NO:

  4
  

• Number of Auxiliary Contacts NC:

  0
  

• Normes et standards:

  Devices complying with international standards IEC 947-5-1 / 947-4-1 and European standards EN 60 947-5-1 / 60 947-4-1. Electromagnetic compatibility (EMC) according to amendment A11 to IEC 947-1, EN 60 947-1 and amendment 2 to IEC 947-4-1
  

• Tension:

  Circuit auxiliaire 690 V
  

• Fréquence assignée (f):

  Circuit auxiliaire 50 / 60 Hz
  Circuit de commande 50 / 60 Hz
  

• Courant thermique conventionnel à l’air libre (Ith):

  acc. to IEC 60947-5-1, Θ = 40 °C 16 A
  

• Courant assignée d’emploi AC-15 (Ie):

  (500 V) 2 A
  (690 V) 2 A
  (24 / 127 V) 6 A
  (220 / 240 V) 4 A
  (380 / 400 V) 3 A
  

• Dispositif de protection contre les courts-circuits:

  gG Type Fuses 10 A
  

• Courant assigné de courte durée admissible (Icw):

  for 0.1 s 140 A
  for 1 s 100 A
  

• Courant assignée d’emploi DC-13 (Ie):

  (24 V) 6 / 144 A
  (48 V) 2.8 / 134 A
  (72 V) 1 / 72 A
  (125 V) 0.55 / 69 A
  (250 V) 0.3 / 75 W
  

• Tension assignée d’isolement (Ui):

  acc. to IEC 60947-5-1 690 V
  acc. to UL/CSA 600 V
  

• Tension assignée de tenue aux chocs (Uimp):

  8 kV
  

• Maximum Mechanical Switching Frequency:

  6000 cycles per hour
  

• Rated Control Circuit Voltage (Uc):

  50 Hz 220 ... 230 V
  60 Hz 230 ... 240 V
  

• Coil Consumption:

  Average Holding Value 50 / 60 Hz 8 V·A
  Average Pull-in Value 50 Hz 74 V·A
  Average Pull-in Value 60 Hz 70 V·A
  Holding at Max. Rated Control Circuit Voltage 50 Hz 8 V·A
  Holding at Max. Rated Control Circuit Voltage 60 Hz 8 V·A
  Holding at Max. Rated Control Circuit Voltage 60 Hz 2 W
  Pull-in at Max. Rated Control Circuit Voltage 50 Hz 70 V·A
  Pull-in at Max. Rated Control Circuit Voltage 60 Hz 80 V·A
  

• Durée de fonctionnement nominale:

  Entre la mise hors tension de la bobine et l'ouverture du contact NO (normally open) 4 ... 11 ms
  Entre la mise sous tension de la bobine et la fermeture du contact NO 10 ... 26 ms
  

• Montage sur rail DIN:

  TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
  TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
  

• Mounting by Screws (not supplied):

  2 x M4 screws placed diagonally
  

• Connecting Capacity Auxiliary Circuit:

  Flexible with Cable End 0.75 ... 2.5 mm²
  Rigid Cable 1 ... 4 mm²
  

• Indice de protection:

  acc. to IEC 60529, IEC 60947-1, EN 60529 Auxiliary Terminals IP20
  acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20
  

• Type de borne:

  Screw Terminals